Solid Carbide Hob
2022-11-03 10:00:08
jiangxingTools
2029
Solid Carbide Hob
Processing step for tungsten carbide gear hob cutter as following:
step o1-raw carbide material
step 02-inside diameter
step 03-end face grinding
step 04-hub grinding
step 05-tooth groove grinding
step 06-tooth profile grinding
step 07-final inspection
step 08-coating
相關(guān)文章
-
PA20° Profile DIN3972 Standard Pre-grinding Hob Cutter with Module m3.5
PA20° Profile DIN3972 Standard Pre-grinding Hob Cutter with Module m3.5Tooh profile is according to... - Round Broach
- Heavy Duty Gear Hub Cutter Inserted Blade Gear Hob with Module M32
- Involute Spline Gear Hob with DIN 5482
- HSS Material Procurement and Idendification
- PA20° Module m1 Standard Involute Gear Hob
- PA20° Profile DIN3972 Standard Pre-grinding Gear Hobber Cutter with Module m2.5
