Shank-type gear shaping cutter with DIN 5482
2021-10-18 13:41:41
jiangxingTools
2334
Shank-type gear shaping cutter with DIN 5482
Tooth profile to DIN5482 standard
Module: m1.6-m2.25
Number of teeth: Z5-20
Pressure angle: 30°
Morse taper: Mk2, Mk3
Shank type gear shaper cutters are full form generated however small the pitch circle diameter (PCD), although the strength of the cutter produced is the limiting factor. The strength and rigidity of shank type cutters is greatly improved by the Jiangxing Tools ribbing method and is especially advised for those of small PCD.
相關(guān)文章
-
HSS M2, M35 Timing Belt Pulley Gear Hob with TiN, TiALN Coating
HSS M2, M35 Timing Belt Pulley Gear Hob with TiN, TiALN Coatingground finishing, according to DIN396... - PA20° Profile DIN3972 Standard Pre-grinding Gear Hob with Module m7
- Timing Pulley Hob for (AT.)D.T (D)T5
- PA30° DIN5480 Involute Spline Gear Hob with Module m8
- PA20° PCD 125mm Bowl Type Gear Shaper Cutter with Module m4~m8
- PA20° Profile DIN3972 Standard Gear Hob with Module m3
- Profile Modifications for Gear Hobs
